Model 2203 Portable Waste Water
The PFM2000 portable flowmeter will
perform all the necessary measurement and recording of
effluent variables you will require to meet present
legislation and comply with regulatory bodies, such as the
Environmental Agency and water authorities.
Pulsonic Technologies advanced effluent
monitoring system brings together the latest measurement
technology to offer this complete solution in a single portable
enclosure. This user-friendly system continuously
monitors flow, and may be supported by an
auto-sampler for effluent collection.
Included is a versatile data logger
specially programmed to automatically generate reports
and provide down loading to a laptop PC or personnal organiser.
Integral to this system is a user
friendly set-up facility to configure for BS3680 primary
devices (flumes and weirs). Other non-standard structures can
be computed utilising a 25-point look up table.
Flow Measurement to BS3680 requires a
"PRIMARY DEVICE" to enable accurate monitoring. The
recommended options are:
- British Standard Flume
- "V" Notch Weir Plate
- Rectangular Weir Plate
- Look-up table
Designed to BS3680 standards the flow
meter consists of an easily programmable unit, which measures
instantaneous volumetric flow, total flow, flow for
programmed interval, pH and temperature. It includes four
relays for auto-sampling and/or high and low level alarms.
The associated IP68 transducer is of a compact design and
includes an integral temperature sensor.
When in its run state the unit can be scrolled back through
the previous 3 record intervals which are generated on the
units 4 line display, or alternatively a manual print out can
be obtained at the push of a button.
The logger memory will hold up to 56 days data
at logging intervals of 5 minutes. The memory is a non-volatile
warp around type where current data automatically supersedes
existing data when the memory becomes full. The unit can be
downloaded to a hand held minicomputer or modem.
Calibration Menu User friendly programming of
weirs, flumes and look up tables.
Relay control for proportional sampling, level alarms
Date and Time.
Log interval (2min to 1hr)
4 lines x 20 characters.
Record interval (1-24hrs)
Displays: flow, distance, total flow, interval flow,
volume, temperature, date and time.
Autoscroll feature enables user to view last 3 days
Windows software Advanced Windows-based
software downloads either direct to PC or via modem.
Full analytical package for tabular and grafical
trend analysis and graphical trend analysis and
display of flow, pH & temperature.
Data Logger 125k of non-volatile memory.
56 days @ 5 min intervals.
Outputs Galvanically isolated 4-20mA
into 500 ohms RS232/422 for communications and data
Inputs Relays 4 programmable relay outputs.
SPCO contact rated.
1 lost echo relay
LED display of relay status.
Enclosure IP65 rated wall mounting type
Power supply 12V nominal, 40AHr, dry cell Transducer Range 0.25 to 60m, EEX m II T6 Resolution 1mm Accuracy +/- 0.1% of measured distance
Pulsonic Technologies are innovators in
Ultrasonics Technology. Contact the Research Division should
you need investigator work.
Pulsonic Technologies Ltd.
Campus House, 10 Hey Street, Bradford,
West Yorkshire, BD7 1DQ, UK
Tel : 01274 741681 Fax : 01274 722842
© Copyright May 1996. All rights reserved Pulsonic
Technologies Ltd have a policy of continued product
improvement and consequently we reserve the right to alter
specifications and prices without prior notice. © Copyright
notice since May 1996