flopro

Pulsonic FloPro

FloPro
can be used to measure and log flows for various applications
including open or closed channel. Typical applications include
monitoring wastewater, storm water, irrigation and industrial
discharge.

FloPro features Pulsonic field proven Doppler velocity and
level measurement sensors. Advanced spectrum signal processing
allows FloPro to produce superior results under a wide range
of hydraulic operating conditions. Even when the pipe slope
is unknown or under full pipe, in surcharge, or reverse flow
conditions, FloPro produces accurate, repeatable results every
time.

FloPro can be equipped with a 4-20mA output for interfacing
to 3rd party loggers, telemetry systems of PLC’s.

FloPro offers optional telemetry interface for long-term
monitoring applications. Communication is made by using PSTN
or GSM allowing remote diagnostics and data downloads.

  • Weatherproof, stainless steel case.
  • Local Display of total flow and flow rate.
  • Optional 4-20mA output.
  • Optional depth measurement system for partially full pipes.
  • Pump Station Monitoring.
  • Standard flow data logger.
  • Industrial monitoring.
  • Modular construction for easy servicing and installation.
  • Billing Networks.
  • Long Term sewer flow monitoring.

General

Size

200mm (W) x 200mm (H) x

125 mm (D)

Weight

6Kg

Enclosure Rating

IP – 66

Enclosure Material

316 Stainless Steel

Operating Temp

-5 to +50 °C

Flow Display

Internal 6-digit 12mm liquid crystal display
of total flow rate (switchable).

Program Memory

Battery backed NVRAM

Power

Internal 6-volt 11Ah Battery with external
Solar panel or 240V charger.

Units of Measure

User definable (in metric units)

Application Software

FloCom PC software for system config, data
downloading & velocity profile testing

Logging Capacity

Over 120 days or 14000 readings. -3 parameters
at 15 min intervals

Flashing Flow Indicator

High-Intensity LED light flashes proportional
to flow rate

(user configurable)

Communications

On site PC interface via serial port

Factory Backup

FloPro is backed by a 12 month parts and
labour guarantee


Velocity
Measurement

Method

Submerged Ultrasonic Doppler

Range

± 0.025 m/sec to ± 4.0 m/sec (+/- 8.0 m/sec
optional)

Resolution

1mm at 1.0 m/sec

Accuracy

± 1% up to 3.0 m/sec

Sensor cable

PVC 0mm diameter up to 50 metres long


Strap
Mount Transducer

(velocity only or combined velocity/depth)

Dimensions

125mm length x 50mm wide x 16mm high

Pipe Intrusion Area

8cm²


Insert
Transducer (velocity only)

Shaft Dimensions

400mm long x 20 mm diameter

Head Dimensions

45mm diam. x 25mm high

(2″ BSP thread)

Pipe Intrusion Area

11.25cm² (2″ BSP) &

4cm² (1″ BSP)


Depth Measurement

Method

Ceramic pressure transducer with large flat
sensing diaphragm which allows straight, undeflected
flow over the sensing area to reduce effects at high
stream velocities and provides for self cleaning with
an impervious Alumina ceramic surface. Optional upward
looking ultrasonic sensor can be provided

Full scale range

2 or 4 m above the transducer face

Accuracy

0.2% of full scale at constant temp in a
static stream. 1% of full scale over a stream 5 to 55°
C

Resolution

5mm

Over range

60 metres without damage


Product Information
General
Velocity
Measurement
Strap
Mount Transducer
Insert
Transducer
Depth
Measurement